Blackstar Dept. 10 Amped 2 100w Amp & Effects Rig Pedal

The Blackstar Amped 2 is a 100-watt pedal power amplifier, equipped with drive pedals in the front-end and and an advanced effects processor that’s capable of delivering the tone and feel of a traditional valve amp. You can use it to power a speaker cabinet, go direct to a PA, or connect to the input of a traditional amplifier — ensuring that you can take your sound with you anywhere. Power reduction down to 1W and USB-C connectivity means that it’s equally at home in the studio as it is on the stage!

Key Features

• 100-watt, 3-channel, performance-ready pedal power amp with onboard multi-effects.
• Unique high-headroom design that automatically matches to the speaker impedance to deliver maximum power and optimum tone with any 8 or 16 Ohm cabinet set-up.
• Response control delivers three distinctly different and authentic power valve flavours: EL34, 6L6 and EL84. Each setting delivers the response, dynamics, sag and break-up characteristics of the selected valve power amp.
• Choose from USA, UK and Classic amp voicings to dial in your perfect tone.
• 3 drive voices (Boost, Drive and Fuzz) with effects including Modulation, Delay and Reverb.
• Pro connectivity and integration into your setup using low-latency USB audio as an interface for recording, TRS stereo line out, and XLR Mono D.I. for live use with built-in CabRig simulator technology.
• Effects loop, two 9V DC outputs and MIDI control for easy integration into your pedalboard or rig.
• Onboard chromatic tuner allows for on-the-fly pitch correction during live performances.
• Universal voltage, so it can be used anywhere in the world from 90V to 264V 50/60Hz.
• Use Blackstar’s free Architect software to deep dive settings for reverb, the effects loop and more.
• Small enough to fit in a backpack or a large gigbag pocket!

3 Channels

• USA: Inspired by classic American amps of the mid ’60s. Very clean, dynamic and bright, but with a solid low-end and controlled mids. A perfect pedal platform setting.
• UK: A distinctive preamp based on a much-loved British Class A amplifier of the early ’60s. A low-to-medium gain preamp that can be used clean, warm or mildly overdriven. Popular choice for a pedal platform or as a responsive crunch tone.
• Classic: Based on Blackstar’s award-winning cascaded valve/tube overdrive circuits and a traditional “British-style passive tone stack”. Perfect for big chords and crunchy rhythm playing, with clear note separation.

Responses

• EL34: Classic British Class A/B crunch, full-bodied soft break-up.
• EL84: Bell-like, full-bodied Class A with lots of compression.
• 6L6: Tight dynamic Class A/B with extended highs and lows.

Specifications

• Power: 100W (can be reduced to 20W or 1W)
• Effects: Drive, Mod, Delay, Reverb
• Channel Voices: USA, UK, Classic
• EQ: Bass, Middle, Treble
• Response: EL34, EL84, 6L6
• Effects Loop: Series or Parallel (selectable in Architect)
• Speaker Outputs: 8 Ohm, 16 Ohm
• 9V DC Outputs: 2 (maximum combined current: 500mA)
• Voltage: 100V to 240V, 50/60Hz
• Dimensions (W x D x H): 288 x 149 x 80 mm
• Weight: 1.98 kg